Affiliation — FAQ

Introduction

Short answers to the questions people ask most about the Affiliation module, with a link to the full steps. The module has three guides:

Start here:

My question is about…Go to
What the module is, and who uses itThe module
Joining, signing in and registrationJoining and signing in
Setting up sessions, fees and togglesSetup for universities
The College ProfileCollege Profile
Applying, corrections and late applicationsApplications
Fees, receipts and payment problemsFees and payment
Committees, inspections and outcomesInspections and outcomes
Logs, exports, documents and error referencesRecords, reports and errors

The module

What does the Affiliation module do? It manages the whole affiliation process between a university and its colleges: enrolling the college, its College Profile, applications in open sessions, fees and payment, physical inspection by committees and inspection teams, and the outcome.

Who uses it? University administrators (the central affiliation administrator, and on a shared portal the administrator of each university), colleges, committee members and admins, inspection team members, land verifiers, and guest observers who need no login. See Roles.

What is the difference between a university portal and a shared portal? A university portal serves one university. A shared portal (HED) serves many universities on one installation. There, each university’s administrator sees only their own data, colleges choose which university they are applying to, and a college can hold a profile at more than one university. Toggles, however, are one setting for the whole portal.

What is a toggle? An on/off switch that changes how the module behaves, such as whether a land verifier must sign off a profile. Only the central affiliation administrator can change one, and it applies to every university and college on the portal. Switching one off deletes nothing. See Toggles.

Where do I find which toggles are on? Settings → Configuration Settings → Configuration Toggles (central administrator), or the Setup readiness panel on Configuration Settings for other administrators, which also says what each switched-on toggle asks of your university.

Joining and signing in

How does a college join? Either by sending a registration request through the university’s public form, or because the university registers an existing Organisational Unit itself. See Get access.

Why does the registration form say “Email Already Exists”? A new college’s contact email must be one that has never been used on Samarth. If the address already belongs to any account, use another one. A college that already has a Samarth login is usually enrolled by the university instead.

I did not receive the verification code. What do I do? Check your spam folder, then use Resend OTP. You can ask for a new code once a minute. A code lasts 5 minutes and is cancelled after 5 wrong tries.

Why does the registration form say it is closed? The central administrator controls the Open / Closed switch on the registration page. The opening and closing dates are shown there for information, but the switch is what lets people in. While it is closed, even a college that is waiting to enter its code is stopped. See Registration settings.

Does a college pay a registration fee? Only if the university has switched on Payment at Registration. The fee is then paid either at registration or, if Payment After Approval is on as well, after the university approves the request. A fee of 0 asks for no payment. A college that paid can check its status on the public Check Affiliation Registration Payment Status page, using its registered email, phone number and registration number.

What login does an approved college get? A college that registered through the public form gets a Guest login by email. It must change the password at first sign-in, and two-factor sign-in is on. A college that the university registered keeps its existing Samarth login. See Sign in for the first time.

I have the college role but my profile will not open. Giving someone the college role does not enrol a college. The profile is created only when the university approves a registration request or registers the college as an existing Organisational Unit. See A college role alone does not enrol a college.

Why is my college not in the Register Existing OU list? The list shows only affiliated colleges and stand-alone institutions of your university that have a head designation, an active head user (an Administrative or Affiliated User account, not a Guest login) and no profile yet. The page lists each missing college with the reason and a button to fix it. See Path 2.

Who owns a college’s profile, and how do we change it? The college’s Nodal User owns it. An administrator changes the owner with Admin Edit Control, or with Change College Head on the College Profiles list. See After enrollment.

Setup for universities

What must exist before I set up Affiliation? Organisational Unit types and your affiliated colleges, head designations and heads, administrator accounts and roles, programmes and disciplines, a payment gateway, and working email. See Before you start.

How do I check that email works? Press Send test mail in the Setup readiness panel on Configuration Settings. It sends one email to your own address.

How do I know what is still missing from my setup? The Setup readiness panel lists, for each university, what is set up and what is not, with a button to fix each gap. See Setup Readiness.

How do I create a session? Under Settings → Configuration Settings → Affiliation Session Configuration. You set the college type, affiliation type, dates, academic year, forms, payment method and gateways, fee mode and intake basis. See Affiliation Session Configuration.

Can two sessions be active at once? Yes, but not for the same college type, affiliation type and academic year. Sessions for different college types, affiliation types or academic years can run together.

Why can I not save a session that bills automatically? No active fee rule covers its affiliation type and college type. Add one under Fee Rule Configuration, or set the session to manual fees.

Why can I not assign a committee to an application? The application’s session has no Audit Form Template. Choose one in the session, then assign.

What happens to applications when a session’s end date changes? The screen first shows who moves between on time and late, and asks you to confirm.

How are fees calculated? In Fee Rule Configuration you create rules for what to charge (programme, discipline, faculty or the whole application), how often, and how the amount is worked out (a rate, bands, student strength, a flat amount or a percentage). The module prices each application automatically from these rules, with tax and late fee lines. See Fee Rule Configuration.

How does a college give its intake? Colleges enter intake by discipline, with each discipline’s year and semester. Disciplines are mapped to programmes under Programmes Configuration.

Who can change the registration fee and the registration dates? Only the central affiliation administrator. They apply to every university on the portal.

College Profile

What does the College Profile contain? Five stages: Institutional Details, Physical Infrastructure, University Programmes, Uploads & Declaration, and a final Complete check. You fill it in once, and it is reused for every application. See Complete your College Profile.

Why can I not make the declaration? The Declaration can be made only when every other section is complete. The What’s left panel lists what is missing.

What do Approve, Send Back and Reject mean for a profile? Approve Profile lets the college apply, and records a numbered version of the profile. Send Back for Correction returns it to draft with a remark. Reject closes it, with a remark as the reason. An approved profile can be sent back only by reopening it, which only the central administrator can do. See Review a college profile.

What is a profile version? Each approval records a numbered copy of the profile exactly as approved. Under Profile History you can print a version or compare it with the current profile or the previous version.

Why can an administrator not approve or reject a profile? If the Land Verifier Workflow is on, a land verifier must record a decision first. The page says whether no verifier is assigned yet, or the assigned one has not decided.

My college’s profile says it is on hold. The college has more than one live profile at the same university, and the university has the Hold Colleges With Duplicate Profiles toggle on. Only the university’s affiliation administrator can fix it, by choosing the profile to keep. Nothing is deleted. See Fix duplicate college profiles.

What if applications point to a removed profile? An administrator can restore the removed profile, or move its applications to the live profile. See Repair a removed college profile.

Applications

How does a college apply? Once its profile is approved, it chooses a session under Apply For Affiliation, selects its programmes, fills the forms the university chose for the session, checks its bill and submits. See Apply for affiliation.

Why can I not submit my application? It must be 100% complete. The page says “Your application is only N% complete. Please complete all required sections before submitting."

The session shows “Apply Date Over”. The session’s end date has passed. Use Late Affiliation Application, where the session shows Apply late. A late application adds the university’s late fee, and is otherwise reviewed like any other.

Can I start from last year’s application? Yes, if an earlier application was submitted. You can copy programmes and entries that still pass this year’s checks, then check each copied section before you submit. Documents are never copied. See Copy last year’s application.

What are Affiliation Corrections? Applications the university has sent back or reopened for changes. Each has a remark saying what to correct. See Correct a profile or an application.

What is the difference between sending an application back and reopening it? Send back for corrections is for an application that is not yet paid; it returns to draft and no payment changes. Re-open application for changes is for a paid application, so the college can change it, for example to add programmes. The earlier payment is kept as a snapshot and a fresh payment is required.

Can an administrator change the late fee? Yes, while the application is unpaid: Add late fee, Update late fee amount or Remove late fee. See Admin Actions on an application.

Why can a college not open its applications? Either its profile is on hold, or the university has recorded previous affiliation dues that are not paid. The page says which. See Previous affiliation dues.

Which documents does a college upload? Whatever the university defines under Extra Document Management, plus the standard uploads. Each says whether it is collected for the profile or the application, and its accepted file type.

Fees and payment

When can a college pay? After the application is approved or the physical audit is passed. If the university has switched on Pay Online Before Audit or Pay Offline Before Audit, payment opens earlier. If it publishes outcomes separately, payment stays closed until the outcome is published. Until payment opens the college sees "… payment is not open for this application yet… Nothing is due until then."

What do the payment statuses mean? Unpaid — not open yet, Unpaid — payment due, Awaiting verification (an offline proof is waiting), Paid, Receipt rejected and Payment reversed. See Payments.

I paid online but the application still shows unpaid. Do not pay again. Wait a few minutes and refresh, because the payment is re-checked with the gateway. If it still shows unpaid, contact the affiliation office and quote your transaction reference.

How does offline payment work? The college pays at the bank by NEFT, RTGS, Demand Draft, Bank Challan, UPI or Cheque, then enters the details and uploads a PDF proof. An administrator verifies the proof and enters the confirmed amount. Until then the application stays unpaid. Every step is added to a payment ledger that is never edited. See Pay your fee.

Can a verified offline payment be undone? Yes. An administrator can reverse it with a reason. The application returns to unpaid, and the ledger keeps the history.

Where is my receipt? Open the paid application and choose Receipt View, then PRINT PDF. Payment → Payment History lists every transaction.

Why does the payment page say no gateway is available? The session has no payment gateway set up for affiliation fees. The university must edit the session and choose a gateway, or switch it to offline payment.

Inspections and outcomes

How does a physical inspection work? An administrator assigns a committee and an inspection window. Committee members score each section, the committee admin consolidates and records the outcome, and the university publishes it. If the Inspection Team toggle is on, a team is also drawn from the pool and each member writes an independent report. See Physical inspection.

Who sees what? Committees and university staff see members' scores and inspectors' reports. Colleges never see reviewers' names or individual scores, only the committee’s overall remark once the outcome is published.

When does a college see its outcome? Immediately, unless the university switched on Publish Outcomes to Colleges Separately. Then the college sees Under review by the university until an administrator publishes the outcome. A send-back for correction is shown at once. See Publish an outcome.

Can a finalised audit be corrected? Yes. A committee admin can reopen it. Previous consolidated scores are kept, and the audit is finalised again after editing. See Committee admin.

Why can a committee not submit or record its outcome? An inspection team is still working on the application. Members' entries are kept as drafts. The committee can go ahead once every report is in, or the university releases the inspection with a reason.

What if an inspector cannot attend? They can decline with a reason, and the university replaces them. The administrator can also replace a member from the inspection page.

Why can an inspector not write the report? The report opens on the inspection date, and must be submitted within the window the university sets. An inspector who missed the window can ask the university to allow a late submission, once per member. See Inspection team member.

How does a land verifier work? When the Land Verifier Workflow is on, a verifier is assigned to each submitted profile and records Approved or Rejected, with a remark and an optional document, before the university can decide. See Land verifier.

Why can I not appoint someone as land verifier? The system refuses to appoint a person who is a university or OU administrator, because appointing them would remove their administrator access. Appointing a land verifier also removes their other Affiliation roles.

How do guest observers join? They are named when a committee is assigned. They receive a unique link, confirm their invited email with a one-time code, declare no conflict of interest and give an advisory evaluation. It is never counted in the official scores. See Guest observer.

How do I add or remove committee members? On the committee form, choose administrative members as committee admins and employee members as committee members. Roles are given while the committee is Active, and taken away when someone is removed or the committee becomes inactive.

Records, reports and errors

What is the reference number in an error message? Whenever the system refuses an action or fails, it shows a reference such as SAVE-261008-4813. Quote it when you ask for help. Under Error History you can search for it. Administrators see every error in their scope; other users see only their own. See Error History.

How do I see who changed something? The Logs section records every important action, with who did it, their role, the before and after values and the time. See Logs. Each application also has an admin action history, and each profile has a Profile History.

How are large exports handled? They run in the background. Open Report → Download Job and choose Download when the job is complete. See Download large exports.

Can the university issue certificates from the system? Yes. An administrator builds a template once, then generates a document for each application and exports it as PDF. See Generate official documents.

How does the university track all its applications? From the dashboard, whose counts each open the list they summarise, and from the application lists, which filter by stage, payment status and audit state. See Start your day from the dashboard.

Who do I contact if my question is not here? Your university’s affiliation office. Quote any reference number you were shown.

Edit this page